ErrorKhoj

Voltas Air Conditioner

Voltas AC F2 error

Indoor coil (evaporator) temperature sensor fault / Outdoor fan motor fault

Needs a technicianReported by one source — verify

Try a reset once. If it comes back, a trained technician should repair it.

Meaning depends on your model

Different Voltas models use this code for different faults. The most commonly reported meanings are below. Check the model number on the sticker of your unit and your user manual to know which one applies.

Possible meaning 1Indoor coil (evaporator) temperature sensor fault

Needs a technician

The control board is getting a wrong reading, or no reading, from the indoor coil (evaporator) temperature sensor. Usually the sensor, its wire or its plug is loose, damaged or has failed.

Common causes

  • Loose or rusted sensor plug on the control board
  • Sensor wire cut, pinched or bitten by rats
  • Sensor has failed (open or short circuit)
  • Less often, a fault on the control board

Try this at home first

Tick each step as you go

When to call a technician

If the code returns after a reset, a technician needs to test and usually replace the sensor. It is a common, low-cost repair.

Possible meaning 2Outdoor fan motor fault

Needs a technician

The outdoor unit’s fan is locked, too slow or not sending its speed signal, so the AC stops to protect the compressor.

Common causes

  • Fan blocked by leaves, a bird nest or debris
  • Faulty fan motor or capacitor
  • Loose wiring or faulty outdoor board

Try this at home first

Tick each step as you go

When to call a technician

If the code returns, a technician should check the fan motor and outdoor board.

Safety first

Always switch off at the wall socket or MCB before touching any part. Do not open the outdoor unit, control boards or gas pipes yourself — they carry high voltage and pressure.

Frequently asked questions

What does F2 mean on a Voltas Air Conditioner?

Different Voltas models use this code for different faults. The most commonly reported meanings are below. Check the model number on the sticker of your unit and your user manual to know which one applies. Indoor coil (evaporator) temperature sensor fault / Outdoor fan motor fault.

Can I fix Voltas Air Conditioner error F2 myself?

You can try a reset first: Switch off at the wall socket or MCB for 5 minutes, then restart. If the code returns, call a technician.

Is it safe to keep using the Air Conditioner with F2?

Avoid repeated restarts; running with this fault can cause more damage.

Other Voltas AC codes

E2 Indoor coil anti-freeze protection E3 Low gas / refrigerant leak or blockage / Outdoor air temperature sensor fault E4 Compressor overheating / High pressure / overload protection / Indoor room temperature sensor fault E5 Overcurrent / compressor overload E6 Communication error (indoor ↔ outdoor unit) F1 Indoor room temperature sensor fault / Indoor fan motor fault F3 Outdoor air temperature sensor fault / Overcurrent / compressor overload P1 Power supply voltage problem P4 Inverter board / power module protection / Power supply voltage problem

All Voltas Air Conditioner error codes

Same code on other brands

F2 Indoor coil (evaporator) temperature sensor fault / Compressor discharge temperature sensor fault / Outdoor air temperature sensor faultBlue Star AC F2 Overcurrent / compressor overloadHaier AC F2 Indoor coil (evaporator) temperature sensor fault / Outdoor coil (condenser) temperature sensor faultGree AC

Sources

We write every explanation in our own words from these references.

Last checked: 2026-10-20