ErrorKhoj

IFB Washing Machine

IFB Washing Machine E4 error

Door / lid not closed or not locking / Too much water (overflow)

Needs a technicianReported by one source — verify

Try a reset once. If it comes back, a trained technician should repair it.

Meaning depends on your model

Different IFB models use this code for different faults. The most commonly reported meanings are below. Check the model number on the sticker of your unit and your user manual to know which one applies.

Possible meaning 1Door / lid not closed or not locking

You can usually fix it

The appliance cannot confirm that the door or lid is fully closed and locked.

Common causes

  • Clothes or an object caught in the door or seal
  • Door not pushed shut firmly
  • Faulty door lock or lid switch

Try this at home first

Tick each step as you go

When to call a technician

If the code continues, the door lock or lid switch needs replacement.

Possible meaning 2Too much water (overflow)

Needs a technician

More water than expected is inside, so the machine stops filling and tries to drain it.

Common causes

  • Inlet valve not closing
  • Water level sensor fault or blocked tube
  • Too much foam confusing the sensor

Try this at home first

Tick each step as you go

When to call a technician

If it repeats, a technician should check the inlet valve and water level sensor.

Safety first

Always switch off at the wall socket or MCB before touching any part. Do not open the outdoor unit, control boards or gas pipes yourself — they carry high voltage and pressure.

Frequently asked questions

What does E4 mean on a IFB Washing Machine?

Different IFB models use this code for different faults. The most commonly reported meanings are below. Check the model number on the sticker of your unit and your user manual to know which one applies. Door / lid not closed or not locking / Too much water (overflow).

Can I fix IFB Washing Machine error E4 myself?

You can try a reset first: Open the door, remove anything caught in the seal and close it firmly until it clicks. If the code returns, call a technician.

Is it safe to keep using the Washing Machine with E4?

Avoid repeated restarts; running with this fault can cause more damage.

Other IFB Washing Machine codes

E1 Water not filling / water supply problem E2 Water not draining E3 Unbalanced load / Motor / drum rotation fault E5 Heating fault E9 Water leak detected DOOR Door / lid not closed or not locking AC HI Power supply voltage problem AC LO Power supply voltage problem TACO Motor / drum rotation fault

All IFB Washing Machine error codes

Same code on other brands

FE Too much water (overflow)LG Washing Machine E4 Unbalanced load / Door / lid not closed or not lockingGodrej Washing Machine E-02 Cooking time set too longSamsung Microwave E4 Compressor overheating / High pressure / overload protection / Indoor room temperature sensor faultVoltas AC E4 High pressure / overload protection / Compressor overheating / Indoor fan motor fault / Drain / water overflow protectionBlue Star AC E4 Outdoor air temperature sensor faultLloyd AC E4 Memory (EEPROM) error — indoor unit boardHaier AC E01 Control board (PCB) faultBosch Dishwasher E4 Compressor overheatingGree AC

Sources

We write every explanation in our own words from these references.

Last checked: 2026-10-20