ErrorKhoj

Haier Air Conditioner

Haier AC F19 error

Power supply voltage problem

You can usually fix itFrom brand’s official support

Most people can clear this with the simple steps below.

What it means

The supply voltage is too low, too high or unstable, so the appliance stopped itself to avoid damage.

Common causes

  • Low or high mains voltage in your area
  • Stabilizer faulty, overloaded or of the wrong rating
  • Loose plug, socket or wiring
  • Short power cut or fluctuation

Try this at home first

Tick each step as you go

When to call a technician

If the socket voltage is normal and the code repeats, have the wiring and board checked by an electrician or technician.

Safety first

Always switch off at the wall socket or MCB before touching any part. Do not open the outdoor unit, control boards or gas pipes yourself — they carry high voltage and pressure.

Frequently asked questions

What does F19 mean on a Haier Air Conditioner?

Power supply voltage problem. The supply voltage is too low, too high or unstable, so the appliance stopped itself to avoid damage.

Can I fix Haier Air Conditioner error F19 myself?

Usually yes. Start with: Wait until the voltage is normal, then restart.

Is it safe to keep using the Air Conditioner with F19?

Yes, once the cause is fixed.

Other Haier AC codes

F7 Suction pipe temperature sensor fault F8 Outdoor fan motor fault F11 Compressor start / rotation fault F12 Memory (EEPROM) error — outdoor unit board F13 Low gas / refrigerant leak or blockage F14 4-way (reversing) valve fault F20 High pressure / overload protection F21 Outdoor coil (condenser) temperature sensor fault F22 Overcurrent / compressor overload F23 Overcurrent / compressor overload F24 Current sensor (CT) fault F25 Compressor discharge temperature sensor fault

All Haier Air Conditioner error codes

Same code on other brands

E19 Heating faultBosch Washing Machine

Sources

We write every explanation in our own words from these references.

Last checked: 2026-10-20