ErrorKhoj

Haier Air Conditioner

Haier AC F8 error

Outdoor fan motor fault

Needs a technicianFrom brand’s official support

Try a reset once. If it comes back, a trained technician should repair it.

What it means

The outdoor unit’s fan is locked, too slow or not sending its speed signal, so the AC stops to protect the compressor.

Common causes

  • Fan blocked by leaves, a bird nest or debris
  • Faulty fan motor or capacitor
  • Loose wiring or faulty outdoor board

Try this at home first

Tick each step as you go

When to call a technician

If the code returns, a technician should check the fan motor and outdoor board.

Safety first

Always switch off at the wall socket or MCB before touching any part. Do not open the outdoor unit, control boards or gas pipes yourself — they carry high voltage and pressure.

Frequently asked questions

What does F8 mean on a Haier Air Conditioner?

Outdoor fan motor fault. The outdoor unit’s fan is locked, too slow or not sending its speed signal, so the AC stops to protect the compressor.

Can I fix Haier Air Conditioner error F8 myself?

You can try a reset first: Switch off at the MCB. If the code returns, call a technician.

Is it safe to keep using the Air Conditioner with F8?

Avoid repeated restarts; running with this fault can cause more damage.

Other Haier AC codes

F1 Inverter board / power module protection F2 Overcurrent / compressor overload F3 Communication error (power module ↔ main board) F4 Compressor overheating F6 Outdoor air temperature sensor fault F7 Suction pipe temperature sensor fault F11 Compressor start / rotation fault F12 Memory (EEPROM) error — outdoor unit board F13 Low gas / refrigerant leak or blockage F14 4-way (reversing) valve fault F19 Power supply voltage problem F20 High pressure / overload protection

All Haier Air Conditioner error codes

Sources

We write every explanation in our own words from these references.

Last checked: 2026-10-20