ErrorKhoj

Samsung Washing Machine

Samsung Washing Machine LC error

Water leak detected / Water level (pressure) sensor fault

Needs a technicianReported by one source — verify

Try a reset once. If it comes back, a trained technician should repair it.

Also shown as: LE 1C 1E LC1

Meaning depends on your model

Different Samsung models use this code for different faults. The most commonly reported meanings are below. Check the model number on the sticker of your unit and your user manual to know which one applies.

Possible meaning 1Water leak detected

Stop & call technician

Water was detected in the base or a protected area, so the appliance stopped to prevent flooding.

Common causes

  • Leaking inlet or drain hose, or a loose connection
  • Torn door seal or loose filter cap
  • Too much foam spilling
  • Internal hose or pump leak

Try this at home first

Tick each step as you go

When to call a technician

If you can’t find an outside leak, call a technician — the internal leak must be repaired.

Possible meaning 2Water level (pressure) sensor fault

Needs a technician

The control board is getting a wrong reading, or no reading, from the water level (pressure) sensor. Usually the sensor, its wire or its plug is loose, damaged or has failed.

Common causes

  • Loose or rusted sensor plug on the control board
  • Sensor wire cut, pinched or bitten by rats
  • Sensor has failed (open or short circuit)
  • Less often, a fault on the control board

Try this at home first

Tick each step as you go

When to call a technician

If the code returns after a reset, a technician needs to test and usually replace the sensor. It is a common, low-cost repair.

Safety first

Always switch off at the wall socket or MCB before touching any part. Do not open the outdoor unit, control boards or gas pipes yourself — they carry high voltage and pressure.

Frequently asked questions

What does LC mean on a Samsung Washing Machine?

Different Samsung models use this code for different faults. The most commonly reported meanings are below. Check the model number on the sticker of your unit and your user manual to know which one applies. Water leak detected / Water level (pressure) sensor fault.

Can I fix Samsung Washing Machine error LC myself?

You can try a reset first: Close the water tap and unplug immediately. If the code returns, call a technician.

Is it safe to keep using the Washing Machine with LC?

Avoid repeated restarts; running with this fault can cause more damage.

Other Samsung Washing Machine codes

4C Water not filling / water supply problem 4C2 Hot and cold hoses swapped 5C Water not draining OC Too much water (overflow) dC Door / lid not closed or not locking ddC Door / lid not closed or not locking SdC Detergent drawer / dispenser problem Ub Unbalanced load Sud Too much foam (suds) 3C Motor / drum rotation fault

All Samsung Washing Machine error codes

Same code on other brands

IE Water not filling / water supply problemLG Washing Machine LE Motor / drum rotation faultLG Washing Machine LOC Child lock is onWhirlpool Washing Machine LC Compressor start / rotation faultBlue Star AC

Sources

We write every explanation in our own words from these references.

Last checked: 2026-10-20